Lenco 12″ x 12″ Edge Mount Trim Tab Kit w/o Switch Kit 12V

Edge Mount Trim Tab Kit12-Gauge Blades / 12-Volt Actuators Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco’s ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious. Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4″ (10.16 cm) less transom height than Lenco standard mount trim tabs. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.Edge Mount actuators mount at the trailing edge of the plane, requiring 4″ (10.16 cm) less transom height than Lenco standard mount trim tabs.

Lenco 15016101 Attributes

• Tab Size:12 Inch Length x 12 Inch Width
• Material:Stainless Steel

Lenco 15016101 Features & Benefits

• 12 Gauge – Stainless Steel Blades
• Fast response electric actuators
• Fully submersible actuators
• Plug and Play waterproof connectors
• Switch Kit sold seperately
• Limited 3 year warranty

Lenco 15016101 Installation Instructions

• Trim_Tab_Manual_TCHDAT.pdf

Lenco 15016101 Technical Bulletins

• size_diagram_edge_mount_TCHDAT.pdf
• standard_performance_diagram_TCHDAT.pdf

12″ x 12″ Edge Mount Trim Tab Kit without Switch Kit -12V

Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4″ (10.16 cm) less transom height than Lenco standard mount trim tabs.

Kit Contents:

• 2 each of 12-gauge stainless steel trim tab blades
• 2 each of #15054-001 actuator with 6′ leads & Deutsch plugs
• 2 each of #30133-103 20′ actuator extensionwiring harnesses
• 2 each of #15085-001 (116) upper mounting brackets with gland seal
• 2 each of #50014-001 (119) lower mounting brackets
• 1 each of the Lenco owners / installation manual
• All necessary stainless steel mounting hardware

Specifications:

• Suggested Boat Length: 17′ to 30′
• Length of Tab: 12″
• Width of Tab: 12″
• Hinge Height: 2″
• Minimum Transom Height: 11″
• Blades: 12 Gauge Stainless Steel
• Finish: Smooth
• Switch Kit: Sold Separately
• Class: Fuel Efficient
• Compliance: CE Certified
• Compatibility: Any Boat
• Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The edge mounts the actuator on the rear edge of the aircraft, and the required crosspiece height is 4 inches less than the standard mounting frame. Trim wings are the most important difference between how you ride a boat and how you ride. They are optional on some ships, but should be equipped as standard with powerful trim and tilt functions. Lenco’s trimming sheet makes your boating smooth, dry and faster, and improves safety. Whether it is on a small boat or a large yacht, Lenco’s ball screw design is more reliable, three times stronger, and has instant response Capabilities, they are very easy to use compared to typical hydraulic systems. We also like the oil-free, environmentally friendly features, instant response electric actuators for precise control; all parts are completely immersed in water, no maintenance, and sealed for life; self-locking ball screw will not drift, even when retreating When the stainless steel decorative sheet cut by No. 12 laser is flat, after years of use, the high-strength corrosion-resistant mounting seat also looks good, clean, and saves time and space. !!!!—-
PRODUCT ID: 29311
SKU: NVN-29311
CSKU: CWR-29311
REWRITE: 40422-lenco-12-x-12-edge-mount-trim
MPN: 15016-101
UPC: 874847004374
ASIN: B001F0IFCY
WSKU: LEN15016101
SSKU: LEN-15016-101
KSKU: LEN15016101
GSKU:
MSKU:
LSKU: 622-15016101
NAME: Lenco 12″ x 12″ Edge Mount Trim Tab Kit w/o Switch Kit 12V
NAME_EX: LENCO 12″X12″ EDGEMOUNT KIT W/O SWITCH TT12X12ENS
PTITLE: Lenco 12″ x 12″ Edge Mount Trim Tab Kit w/o Switch Kit 12V
TYPE: Boat Outfitting | Trim Tabs
VENDOR: Lenco Marine
Google Category: VEHICLES & PARTS > VEHICLE PARTS & ACCESSORIES > WATERCRAFT PARTS & ACCESSORIES
Amazon Category:
Amazon Title: LENCO MARINE 15016-101 Edge Mount Trim Tab Kit Without Switch – 12″ x 12″
Google Title: Lenco Marine Edge Mount Trim Tab Kit, 12″ x 12″
Amazon Category:
Gtags:

GSpecs: